Solution for iPhone 13 Pro Max White or Green Screen Issue: Soldering Jumper Method

 Solution for iPhone 13 Pro Max White or Green Screen Issue: Soldering Jumper Method



The iPhone 13 Pro Max is a technological marvel, but like any other device, it’s not immune to issues. One such problem that some users have encountered is the dreaded white or green screen glitch. If you’re facing this dilemma, fret not! In this article, we’ll guide you through a DIY solution using the soldering jumper technique to get your iPhone 13 Pro Max back to its vibrant self.

Identifying the Problem

A white or green screen on your iPhone 13 Pro Max can be frustrating and worrisome. It often indicates a connection problem between the display and the internal components. This is where the soldering jumper method comes to the rescue.

Materials You’ll Need

  1. Soldering iron and solder
  2. Thin gauge insulated wire
  3. Precision screwdriver set.
  4. Patience and a steady hand

Step-by-Step Solution

  1. Prepare the Device: Power off your iPhone and carefully remove the screws holding the back cover. Gently detach the cover and disconnect the battery.
  2. Locate the Problem Area: Inspect the back of the screen for small soldering points that may have become detached or damaged.
  3. Identify the Jumper Points: Using the provided image as a guide, find the two points that need to be connected with a jumper. These points can be recognized by their proximity to the damaged area.
  4. Solder the Jumper: Heat up your soldering iron and carefully solder a thin piece of insulated wire between the identified points. Ensure the connection is secure but avoid excessive heat that could damage nearby components.
  5. Test and Reassemble: Carefully reconnect the battery, reattach the back cover, and power on your iPhone. If done correctly, the white or green screen issue should be resolved.


While dealing with internal components might seem daunting, the soldering jumper method provides an effective solution for addressing the white or green screen problem on your iPhone 13 Pro Max. However, if you’re uncomfortable with the soldering process or the issue persists, it’s advisable to seek professional assistance or visit an Apple service center. Your iPhone 13 Pro Max is a valuable investment, and with a little DIY effort, you can bring it back to life and enjoy its stunning display once again.

Related Post

Leave a Reply

Notify of